Controllers and remotes
Photo coming soon

WiFi and RF DMX512 Master, 1 to 5 Channels

DMX512 master that turns phone app, voice, RF remote and push switch commands into a DMX signal for DMX decoders.

CodeLUZ-WT-DMX-S
Spec sheet PDF
Control App, voice and RF remote WiFi app, RF 2.4 GHz remote and two push keys
Input 12 to 36V DCDraws under 0.1 A
Output DMX5121 to 5 channels, 8 or 16 bit
Dimming Up to 65536 levels 16 bit; 256 levels at 8 bit

Specifications

Electrical

Input
12-36V DC, <0.1A
Output
DMX512 signal, 1 to 5 channels, 8 or 16 bit
Control
WiFi app and voice control, RF 2.4GHz remote, two push switches
Dimming
256 or 65536 levels (8 or 16 bit), 0 to 100%
Protections
Reverse polarity
Range
30 m

Build and installation

Size
114 x 38 x 20 mm
Ambient temperature
-20 to 55 °C

About this product

It runs from its own low voltage power supply and is wired to the DMX input of one or more DMX512 decoders, which drive the strip; it powers no LEDs itself. Its set key chooses the light type, from single colour and tunable white to RGB, RGBW and RGB with tunable white, before it is added to the phone app over a 2.4GHz WiFi network or matched to an RF remote. One wall push switch switches and dims the lights, a second steps through the scenes.

Features

  • Scenes, timers, schedules and a music mode in the app
  • Decoders on one DMX line run in step
  • Needs a 2.4GHz WiFi network; 5GHz networks are not supported

Applications

  • DMX512 decoders for constant voltage LED strip
  • The RF 2.4GHz remotes of this range

More in Controllers and remotes

See all
WiFi and RF DMX512 Master, 1 to 5 Channels