Photo coming soon

LED Driver with Sensor Control 60W, 24V

Slim constant voltage driver for the solder free profile system, with a signal port that lets a sensor switch the lights on its outputs.

CodeLUZ-LDL2460-W

Spec sheet PDF

Control Sensor switch Connects to the signal port

Power60 W 180-264V AC (200-240V AC nominal)

Output 24V DC Constant voltage, rated 2.5 A

Efficiency ≥ 86% At 230V AC

Protection IP20 For dry indoor rooms.

Specifications

Electrical

Power: 60 W
Input: 180-264V AC (200-240V AC nominal), 47-63Hz
Output: 24V DC constant voltage, rated 2.5A
Control: Sensor switch on the signal port
Power factor: ≥0.9 (230V AC)
Efficiency: ≥86% (230V AC)
Protections: Short circuit, over current, over voltage

Build and installation

Size: 230 x 74.2 x 13.5 mm
IP rating: IP20
Ambient temperature: 0 to 40 °C

About this product

It runs from its plug in mains cord, and the profiles' connector cables or a distributor plug straight into its outputs. Used without a sensor it works as a plain driver; with a sensor switch on its signal port, the main outputs switch together while one further output is not controlled by the sensor. Install it in a dry, ventilated place and choose it with some margin over the total load.